4-channel power amplifier of our new Vera Audio P4x150 which is sold at a discount compared to the finished model.
This only differs in that the top and bottom lids do not go over the cooling fins. And it does not come with packaging with a logo (only simple packaging without a logo and name). Otherwise, it is identical to our new P4x150 and is of course sold with full warranty and complaints (5 years). So here it is possible to make a very good purchase.
Technical info:
This is a 4-channel class D power amplifier with 4 x 150W in 8 Ohm and 4 x 250W in 4 Ohm. Capable of loads down to at least 2 Ohm, where it produces a maximum of 4 x 180W. The figures are stated with THD=1% at 1KHz
Very low distortion as can be seen in the attached graphs/images.
Signal to noise ratio: 121 dB.
CMRR: 71dB
Output Impedance:
f<1kHz 2.5 mΩ
f<20kHz 5.0 mΩ
- XLR inputs
- Both spade and banana plugs can be connected to the speaker terminals. You can also connect stripped cable up to 6mm2. (The hole in the terminal is 5.6mm in diameter).
- There is also a speakon connector for speaker 1+2 and for speaker 3+4. A 4-pole speakon cable is used here.
- Main switch on the back and standby push button on the front. The standby button in the front has an LED light that shows an orange color when it is in standby and a white/beige light when it is on.
- Trigger input of 12V. You can connect a mini-jack cable for remote control of the amplifier. The amplifier can then be switched from standby to on or vice versa from an external device such as a DAC, preamplifier, AV processor, etc.
- The amplifier has a clipping indicator. At higher THD distortion, it will flash red in the LED light at the front.
- There is very good cooling in the amplifier where the modules are mounted vertically to solid heat sinks as well as air holes at the top and bottom. The amplifier hardly gets lukewarm and the good cooling ensures that the components have a long life span.
- It also has both RF filtering and ESD protection (static electricity).
Dimension:
Length/depth w/speaker terminals: approx. 34.2 cm
Width: 33 cm
Height 13.5 cm w/feet
Weight: 8.2 kg
Finish: Black, brushed aluminum
Comes with power cable and trigger cable.
